blu PLUS+™ Charge Kit
How do I charge the blu PLUS+™ Rechargeable Device?
Batteries are shipped with a partial charge; however, we recommend that batteries are charged fully before first using them.
Complete the following steps:
- Remove the plastic wrapping from one of the batteries.
- Open the pack and locate the slot marked “CHARGE”.
- Insert the battery’s open-ended side into this slot and close the lid.
When you first place a battery into the pack for charging, the blue light (on the charge pack) will slowly flash. This indicates the remaining number of times the pack can charge a battery before the pack itself needs recharging.
The pack’s red light will glow when the battery has been properly loaded into the case and the lid is closed. A solid red light indicates the battery is charging. When the battery is fully charged, the red light will switch off.
If the red light blinks rapidly, remove the battery for ten seconds then reinsert it into the pack. If the red light continues to blink rapidly, this indicates the battery is defective or has been depleted of its charge, and the battery should be discarded and replaced with a new one. If you need to exchange your battery, please contact our Customer Service team.