blu PLUS+™ Rechargeable kit
How do I charge the blu PLUS+™ batteries?
Batteries are shipped with a partial charge; however, for best performance with first time use, it is recommended that you completely charge the batteries before using them.
Complete the following steps:
1. Remove the plastic wrapper from one of the batteries.
2. Open the pack. Locate the slot marked “CHARGE.”
3. Insert the battery’s open-ended side into this slot, and close the lid.
When you first place a battery into the pack for charging, the pack’s blue light will slowly flash according to the remaining number of times the pack can charge a battery before the pack itself needs recharging.
The pack’s red light will glow when the battery has been properly loaded into the pack and the lid closed. A solid red light indicates the battery is charging. When the battery is fully charged, the red light will shut off.
If the red light blinks rapidly, remove the battery for 10 seconds then reinsert into the pack. If the red light continues to blink rapidly, then the battery is defective or has been depleted of its charge, and the battery should be discarded and replaced with a new one. In the event you need to exchange your battery, complete the Replacement Merchandise Authorization (RMA) form online.