How should I dispose of the myblu™ battery?

Q: What charger should I use with the blu® device?

We do not recommend that you use any other charger or charging cord sold by a third party as it may not meet voltage and current requirements for the blu device. Replacement chargers and other accessories may be purchased separately in our [online store](https://www.blu.com/en/US/accessories/blu-wall-plug-us). To charge your blu device, insert the USB cable into a USB-compatible device (such as a laptop) and then plug the other end of the cable into the port at the base of the device. Make sure that the charging contacts are properly aligned.***While the blu device is charging, the indicator light on the bottom of the device will remain RED until it is fully charged. Once the red light turns OFF, the device is ready for use.***

Q: How do I charge the blu device?

Complete the following steps: 1. Remove your device and Liquidpod from packaging.***2. Unfold the attached USB cord from the pack and plug it into a USB-compatible charging port.***3. Connect the rechargeable device to the USB cord with the charging contacts properly aligned.***4. Once your device begins charging, the red light on the end will glow and remain illuminated.***5. When the indicator light turns off, your blu is fully charged. If the red-light blinks rapidly, remove the device for 10 seconds then re-connect the device to the USB cord. If the red light continues to blink rapidly, then the device is defective or has been depleted of its charge.

Q: How do I know when the blu® device needs to be recharged?

• BLUE indicates the device battery has 20-100% remaining charge.***• ORANGE indicates the device battery has 5-19% remaining charge.***• RED indicates the device battery has 0-4% remaining charge. A red indicator light means it is time to recharge your device as soon as possible. Because you may charge your blu device while fully assembled, vaping is possible while your device is being charged. ***

Q: How do I use blu® Liquidpods?

1. Select your preferred Liquidpod and remove from packaging.***2. Insert the Liquidpod into the rechargeable device. You will feel it click into place.***3. Once you are ready to use your blu device, gently draw on the mouthpiece. The device will self-activate and begin producing vapor.***

Q: What are the safety features of the blu® device?

If you take a single puff lasting 10 seconds or more, the blue indicator lighting will flash 10 times and your device will shut down and reset after a few seconds. This feature ensures that your blu device stays within normal operating conditions to provide a consistent, quality experience. ***Short circuit protection:*** In the event of a short circuit prior to use, the blue indicator light will flash 3 times and the unit will automatically shut down. If a short circuit occurs during operation, the indicator light will flash 5 times and the unit will shut down. Should either of these occur, charge your device with the USB cord provided.***

WARNING: This product contains nicotine. Nicotine is an addictive chemical.

Underage Sale ProhibitedVapor Products

FAQs

General blu ® Device and Pods Flavors blu® Disposables blu PLUS+® Devices bluNation® REWARDS E-cig Chargers My Account Ordering Our Policies Returns & Refunds Shipping, Autoship & Delivery Troubleshooting Regulation

Choose a topic

blu ® Device and Pods

What charger should I use with the blu® device?

How should I dispose of the blu?

Observe local, state and federal laws and regulations regarding product disposal.

How do I charge the blu device?

How do I know when the blu® device needs to be recharged?

How do I use blu® Liquidpods?

How long does the blu® device battery last?

How should I store the blu® device?

What are the safety features of the blu® device?

Can I return a defective blu device?